ESRack - Virgin Media Super Hub 5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack Mount Kit for Virgin Media's Superhub 5 - Bracket in Separate Listing
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Rack Mount compatible with Virgin Media Superhub 5.
IMPORTANT:
THIS MODULE IS NOT FULLY COMPATIBLE WITH ALL OTHER ESRACK MODULES.
This model will not fit alongside a normal ESRack Module in a 19" rack, to combat this issue, I have provided below a URL to the accompanying brackets that are recommended to ensure that you can actually rack mount this.
You will need:
2x ESRack Short Mounting Brackets
1x ESRack 2U Mounting Bracket (designed for this print)
READ THIS BIT BEFORE PRINTING:
You may need to tear off the flexible silicone foot on the back of the box for mount this to fit, by doing so, you accept responsibility that Virgin Media may charge you a fee upon returning the unit to cover the cost of replacing this part of the unit if you decide to switch ISPs or need to replace the box due to a fault.
If you tear off the foot of your router, you agree that the authors of this model are not responsible in any capacity.
Recommended Settings:
Infill: 25%
Infill Pattern: Gyroid
Supports: Enabled (careful not to accidentally put them in the screw holes like I did).
Shoutout to the creator of the Device Template for sharing this wider version with me.