Printer Skirt & Feet for Rolohaun Simple Core
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skirt & feet design for the Rolohaun Simple Core printer.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I've been getting bored with hexagons, so I put together a new skirt & feet design for the SimpleCore (2025 version). Inlaid Rolohaun's logo in the center of each side, as well as an "S" and "C" in the "cool S" font from the 90s. Also, I added the necessary cutouts to accommodate the belted Z axis brackets. There are versions for the stock design with 350mm horizontal extrusions, as well as larger versions for 400mm horizontal extrusions.
Revision Log
2026-04-22 -- Initial Release
2026-04-26 -- Added some QoL features. Through holes for hex key access. Also removed any features that would require significant bridging, and changed the inlays to single pieces that insert from the inside.
BOM:
Qty 12 - M3 (Short) Brass Inserts (For foot accents)
Qty 12 - M3 x 6 Button Head Cap Screws (For foot accents)
Qty 24 - M5 T Nuts (For mounting to the frame)
Qty 24 - M5 x 8 Button Head Cap Screws (For mounting to the frame)
Qty 4 - M5 Hex Nut (For rubber/TPU feet)
Qty 4 - M5 x 20 SHCS (For rubber/TPU feet)
Print Settings:
Material Used: Inland (Micro Center) PETG-CF
I just followed the Voron spec for this one:
Use PETG-CF or Better
Layer height: 0.2mm
Extrusion width: 0.4mm, forced
Infill percentage: 40%
Infill type: gyroid
Wall count: 4
Solid top/bottom layers: 5
Supports: None