1 / 3
Francis hydroelectric turbine - cylinder gate regulation — zdjęcie 1
1 / 3

Francis hydroelectric turbine - cylinder gate regulation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a scale model of an early 20th century vertical Francis turbine with old school cylinder gate regulation.

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
165
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a model of an early 20th century water wheel, (now more commonly called a Francis turbine) that is designed for low heads. Instead of wicket gates, it uses a cylinder that throttles the flow going into the runner by lowering the cylinder. This model uses a 5mm shaft for the runner, and 2mm shaft for the gears, and regulation shaft. There are 2 main shaft bearings, both 5mm ID 16mm ID. Most parts are just superglued together, but the draft tube screws into the guide vanes with M2 screws. You could connect it to a small generator, but you wouldn't make much usable power at this scale. Just a fun proof of concept model mostly!

Tagi