Qidi Q2 Exhaust 4" Duct Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adapter that attaches to the exhaust port of a Qidi Q2 and allows for the use of 4" diameter ducting.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was born because I had already bought stuff for my Qidi Q2 off Amazon before the printer itself even arrived. Instead of getting a smaller duct, I figured I'd just make an adapter so I could use what I already have on hand.
It's a pretty easy print, I used default PETG settings and the adapter came out clean. For attaching the adapter to the rear of the printer, I used M3x8 socket head screws. You may need to pre-insert the screws into the holes in the back of the printer and then remove them before attempting to attach the adapter, the holes aren't threaded and need some help to make installation easy.