Coin Cell Battery Dispenser — multi-section tray (parametric OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Half-cylinder edge-mount wells for coin cells: pinch one out by the visible half.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Tray for an actual stash of coin cells, not the usual blister-pack holder. Each cell stands on edge in a half-cylinder pocket; the top half sticks proud of the tray so you pinch it out with thumb + index. Solid divider walls between sections keep the types from mingling.
Stock layout (29 cells, 6 sections):
- 4 × Lr44 / A76 / Ag13 (Ø11.6 × 5.4)
- 4 × Lr1130 / Ag10 (Ø11.6 × 3.1)
- 4 × Cr1620 (Ø16 × 2.0)
- 4 × Cr2016 (Ø20 × 1.6)
- 8 × Cr2025 (Ø20 × 2.5)
- 5 × Cr2032 (Ø20 × 3.2)
Fully parametric — edit the .scad. Top of the file has the sections list: each row is [battery_d, battery_t, count]. Add, remove, reorder, change counts — every dimension downstream (tray footprint, divider spacing, well placement) is derived. Wall, base thickness, well clearance, and the side-wall honeycomb engraving are also parameters at the top of the file.
Sections are ordered shortest-cell to tallest so the front edge of the tray steps down progressively (visible in the angled photo).
Outer walls carry a shallow honeycomb engraving — purely cosmetic; disable with deco_enabled = false if you prefer plain walls.