Voron 2.4 Bondtech INDX front adapter

I created this model because I have CNC gantry parts and don't want to lose them. Additionally, this adapter doesn't require the removal of any parts; just unscrew the Z-belts, feed them through the adapter, and re-tighten them.

What you need:

• DoorBuffer mod to get some of the lost build area back

• 6x M3x8 screws

• 4x M3 Inserts

• 6x M3X10 screws

• 4x M3x16 screws

• 6x M3 hex nuts

• 4x M3 T-nuts (for 2020 profile)

• 1515 Extrusion 400/350/300mm

Note: Any cable chains on the Y-axis will collide with the adapter. Therefore, I recommend moving the X and Y endstops to different locations (there are many mods available for this).

• V2.0: Added clearance for reaching the hexnut of the belt tensioner top part 

• V3.0: Shortened the Adapter after the toolhead was not able to reach the tools

This is V2.0, so feel free to comment if you encounter any problems or have feedback!