Zen Lamp: Bauhaus-inspired table lamp

How it works

1. Purchase your preferred pendant fixture type. Two options are available but only one is required.

2. Print the STL or 3MF files using the provided PDF guide.

3. Install the bulb and twist the diffuser onto the base.

4. Place the shade on top of the diffuser.

5. Twist the cap onto the diffuser to lock the shade in place.

6. Plug it in. Enjoy!

Features

• Flexible Fit: Includes base files for common and inexpensive E26/E27 pendant fixtures.

• Twist-Lock Assembly: The shade easily snaps into the base with a twist, making bulb changes simple.

• Efficient Printing: Designed to be printed with "spiral vase" mode for fast print times. The base features slots for optional TPU feet to prevent sliding.

Parts & Files

• Includes 3MF + STL files and a PDF printing guide.

• Easy to slice in PrusaSlicer, OrcaSlicer, or Bambu Studio.

• Requires a minimum bed size of 180mm x180mm x120mm.

• Hardware Required:

  • 1x 5-9W E26/E27 LED Bulb (Max 2.5”/6.5cm diameter).

  • 1x Pendant Light Fixture (Threaded 40mm or Smooth 37mm).

  • Recommended filament:

    • PLA or PETG for the shade and base

    • PETG (transparent) for the diffuser

    • TPU for the optional feet

Print Statistics (Prusa Core One, 0.6mm nozzle)

• Shade + Diffuser: 62g, 1.1hrs

• Base: 255g, 3.5hrs (including cap + parts)

 Instructions

1. Shade

   1. Print using spiral vase mode with 4 bottom layers. Confirm your slicer updated related settings to the following:

      1. Spiral Vase: enabled (the name may vary based on the software)

      2. Top Layers: 0

      3. Bottom Layers: 4

      4. Infill: 0%

      5. Perimeters: 1

2. Diffuser

   1. Print using spiral vase mode in a transparent filament.

   2. Use the same settings as the Shade

   3. There are additional tips for better transparent results in the print guide PDF

3. Base Variant 1: Threaded Fixture

   1. Print without supports using your preferred settings. My preferred settings:

      1. Perimeters: 3

      2. Infill Fill Density: 10%

      3. Infill Fill Pattern: Gyroid

   2. There are 2 variants, with and without a negative cavity for the feet

4. Base Variant 2: Smooth-Walled Fixture

   1. Use the same settings as the Threaded Fixture

   2. Requires a threaded collar to tighten the base around the fixture. A secure fit requires a tight tolerance. I prefer to print it separately from the base using the same slicer settings.

   3. Insert the smooth-walled fixture so that it extends 2 - 5mm (1/8 - 1/4in) above the base (as shown in the photos)

   4. Thread on the collar until tight. The collar is tight if the fixture remains secure when screwing in the light bulb.

5. TPU feet, Optional

   1. Print in TPU to protect your surfaces and add grip.

   2. To insert the feet into the base, align the foot, then press the base and foot against a tabletop.

** These files are for personal use only and not to be resold. Become a member to access our portfolio with commercial use.