Pickup with TPU Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of a pickup with fun assembly and TPU wheels. No support is needed for printing.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Advantages of this design:
no supports,
fun assembly,
opening trunk,
rotating steering wheel,
TPU wheels,
interesting toy for children.
Recommended settings for printing:
for "car_left_side" and "car_right_side": 0.2mm layer height, 2 walls, 15% infill;
for other parts: 0.2mm layer height, 2 walls, 20% infill;
use brim for small pins, big pins and wheel holders.
Recommended parts orientation:
Assembly:
Use "pin_tolerance_test" to decide whether to use low tolerance parts or increased toleranced parts.
Insert "steering_wheel" into "car_left_side".
Insert big pins and small pins into "car_left_side".
Insert "sits_x2" into "car_left_side".
Insert 82 mm of filament into "trunk door".
Insert "trunk door" into "car_left_side".
Connect this assembly to "car_right_side".
Place "tpu_wheel_x4" on "chassis_x4". Make sure that holes on both parts are aligned.
Fix "tpu_wheel_x4" to "chassis_x4" with "wheel_holder_x4". Push it with allen key, for example.
Repeat 3 more times.
Insert big pin into the "chassis_x4".
Insert this assembly into the car.
Connect the second assembly.
Do the same on the other side of the car.
Insert "headlight_x2" into the car.
Assembly finished!
