Samsung Fridge Water Dispenser 5mm LED Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder designed to fit a standard 5mm LED into the unused slot in a Samsung fridge water dispenser
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple holder designed to fit a standard 5mm LED into the unused slot in a Samsung fridge water dispenser. It provides a clean and secure way to add custom lighting, improving visibility when dispensing water or giving the fridge a subtle visual upgrade.
The holder is sized for a snug press-fit, keeping the LED in place without additional hardware. It aligns with the existing opening in the dispenser for a tidy, integrated look.
Features:
Designed specifically for Samsung fridge water dispenser slot
Fits standard 5mm LEDs
Press-fit design (no glue required in most cases)
Compact and unobtrusive
Print Settings:
No supports required
Layer height: 0.2 mm recommended
Infill: 15–25%
Material: PLA or PETG
Notes:
Depending on your printer tolerances, slight sanding may be needed for a perfect fit
Ensure proper wiring and insulation when installing the LED. I used an 80ohm resistor with a 3v white led
Always disconnect power before modifying your appliance
Use Case:
Ideal for adding illumination to your water dispenser area or for simple DIY fridge lighting mods.