Longer Filament Spool Holder Hub for Larger Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended the hub part of the universal filament spool holder so that it can be used with 3kg and 5kg spools.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
@PurchenZuPoden's "Universal Filament Spool Holder" is great but the hub is not long enough for bigger filament spools. This remix extends the hub so that it can be used for 3kg and 5kg filament spools.
There are two versions: a 160mm (shown in the photo) which should be enough for 3kg spools, and a 207mm that should be more that enough for nearly all 5kg spools out there. You can always just print the longer one since that will work for smaller spools also, although it will be a bit more cumbersome when changing smaller spools.
Remember that you'll need a nut to go with it. You can use the one in the original Gen2 design or one of the fixed ones posted as remixes of that model.