Benchy handle for P1S, X1C, and X1E
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun little slip-on handle for the P1S, X1C, and X1E in the shape of the classic benchy.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Slip this decorative handle onto your P1S, X1C, or X1E door as a fun way to perk up your printer! Benchmark your printer with this classic boat, and then as an added bonus, slip it onto your door as an ornamental handle. I designed this so that it is easy to slip on, but not so loose that it falls off immediately (as a matter of fact, it fits on quite snugly).
PRINT TIPS AND RECCOMENDATIONS
I would advise quickly bed leveling or calibrating your printer before printing this, as there are two large bridges in this model.
Your printer may say that it needs supports (at least mine did), however I printed without and as long as your printer is calibrated enough, it should be fine.