Buddy3D Camera Prusa XL Magnet Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buddy3D Camera CORE One magnet mount back for Prusa XL enclosure.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
After the update that allows live RSTP streaming from the official PRUSA cameras I picked up the CORE One Buddy3D cam with the intention of mounting it for a top down view inside my XL enclosure. I looked a few of the magnet mount back covers and decided to just remix my own to fit some leftover 12mmx3mm magnets I had from a past project.
I'm sure someone out there can do a much better job so I'm including my f3d and STEP files along with the 3MF. My magnets were a snug fit but I still used a few drops of CA glue to make sure they stay in place.
Printed it out of PETG, 25% gyroid infill, I used some cheap PLA for the supports, and printed it with the "R1" text facing the bed, magnet side up. I oriented the camera with the SD card slot facing the enclosure door. It's been in use for about a month now without any overheating issues.