IMPROVED Owala FreeSip Sway Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved version of the Owala FreeSip Sway Water Bottle button
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Printed original model and it was just too loose and let my Owala slip open. So I went into Tinkercad and fixed up the model. I made 3 variants just in case, but the +1mm version worked absolutely perfect for me. Uploading the others to save others trouble if that's too much or too little!
Files Included:
+ 0.66 mm
+1 mm (Worked perfect for me)
+ 1.66 mm to this one
Here is how I printed mine:
Print Settings:
Material: Inland Olive Green High Speed PLA+
Support: Tree Supports . You will need supports for the part!
Print Orientation: Have it on its side, that is the strongest orientation. Screenshot provided!
Layer Height: 0.2mm worked well for me
Infill: 0%
Walls: 6