Logitech G29 Wheel to Logitech Driving Force Base Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount a Logitech G29 wheel onto a Logitech Driving Force base using M6 bolts and nuts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter allows mounting a Logitech G29 steering wheel onto a Logitech Driving Force wheel base. It is designed as a strong and straightforward mounting solution that ensures correct alignment and secure attachment between the wheel and the base.
The design uses standard M6 hardware for reliable fastening. Hex nut pockets are built into the model so the nuts fit tightly into the print and remain fixed during tightening. It is recommended to use M6 bolts together with large washers to distribute the load evenly and increase the durability of the mounting points.
Printing instructions:
Print the adapter with supports enabled on the side containing the nut pockets, facing the build plate. This ensures proper formation of the nut cavities and reliable structural strength. Use a durable material such as PETG, ABS, or similar. Recommended infill is 100% to withstand mechanical stress during use.
Hardware required:
M6 bolts (length depends on your specific setup)
M6 hex nuts (designed to fit into integrated nut pockets)
M6 large washers (recommended for improved load distribution)
This adapter is intended for users who want to install a Logitech G29 wheel onto a Logitech Driving Force base while maintaining a solid and dependable mechanical connection.