Anschutz / FWB airgun cheekpiece support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anschutz airgun cheekpiece support to replace broken piece including baseplate to support in case of damaged wood.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Open Community License v1
This piece fits inside the wooden cheekpiece of older Anschutz air rifles, a baseplate is also provided in case the wood is not flat or damaged. In normal cases you dont need this piece.
Print in ABS, ASA or another solid material, the threads are M6 and are intended to be tapped manually because of tolerances. In case you want to model the threads and print them the freecad file gives all the possibilities you need.
2026-05-03: Someone suggested that the piece also works on some older Grünig & Elmiger and Feinwerkbau stocks but I haven't confirmed this.