Gridfinity Solder Fume Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Portable solder fume fan in a Gridfintiy 1x1x6 format.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 50
- Wydruki
- 2
- Wyświetlenia
- 546
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A compact, portable fume extractor in a 1x1x6 Gridfinity form factor. Ideal for storing in Gridfinity tool boxes.
Components
Filter (e.g. Hakko A1001 - cut to size)
4010 fan (e.g. Sunon EE40101S1-1000U-999)
USB PD module (e.g. AITRIP PDC004-PD)
Four M3x14 screws
Print settings
Material: PETG
Layer height: 0.25
Lid
no top or bottom solid layers
22% honeycomb infill
Bottom bin part
paint-on organic support for the USB-C opening
Assembly
Solder the USB module to the fan
Glue the module to the bottom part of the bin behind the USB-C opening
Stack the components: bottom bin, fan, top bin
Fasten the assembly with four M3x14 screws (the holes are design to be self-threading)
Cut-to-size and insert filter
Slide the lid into place
Disclaimer
This is a hobby project and has not been formally tested for any use case. It is not a substitute for proper ventilation or certified fume extraction systems.