Navee GT3 E-Scooter - Bottle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So I made this Bottle Holder for my Navee GT3 Pro E-Scooter and wanted to share it with you all.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Riding while holding a bottle of water can be frustrating, so I designed this bottle holder specifically for the Navee GT3 series (compatible with the GT3 Pro and GT3 Max). This is my first upload, and I hope it helps anyone who has had the same experience. There aren’t many 3D‑printed accessories available for Navee scooters, so I’m happy to contribute something useful to the community.
I recommend printing this in ABS, ASA, or PETG — mine is printed in PETG.
You will need:
3 × cable ties (3.6 × 150 mm)
Glue — I used 5‑minute epoxy (CA glue may not hold well)
Hair elastic / rubber band
Assembly Steps:
Glue Dowel inplace with epoxy to the Bottle Bottom.
Glue Upright to Bottle Bottom
Slide Bottle claw in place (This is adjustable) - so it must be moveable
Glue Bracket A to Uprtight.
Unscrew the lower screw from your Hook
Place the bottle holder over the exsisting screw hole and rescrew the hook screw in place.
Take Barcket B and aliagn to fit with Barcket A (can only go one way)
Use the Cable ties and clamp Bracket A to Bracket B
Use the Last Cable tie so add support for the Upright Stem and Bracket A.
Take rubberband/hair elastic and place over the hooks.
Enjoy!
Should you want to make adjustment see Onshape Link.
https://cad.onshape.com/documents/247f0d8edce079f140e746d6/w/ab8eaff1bbca931c40bc9ae2/e/7eea174ccdee3cc476f06eef