APOS +Community Gremlin Armour
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side panels for your Gremlin to protect if from cats, children and other vermin.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Clip-in side panels for the Apos + Community Gremlin Amp. All panels but the front just snap in and out. The front you have to remove the volume knob.
Important: DO NOT USE PLA or even PETG. The tubes get very hot and are only 7mm from the side panel. You need ASA/ABS at a minimum. Better would be PC or a high temp engineering plastic.
Panels shown in the photo are the mock up in ASA and I'm moving to PC -the black panel.
Printing: HOT :) no supports. 2-3 wall, 10% infill more than enough.
I got wondering if adding the side might trap air a bit and cook the caps. So I made a top plate too with vents. Painted with copper spay paint turned out nice.