HG Gundam base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HG gundam base. I use these for my kits because its cheaper and less noticeable than the one's you can buy. I made the…
- Ocena
- 5 / 5
- Polubienia
- 179
- Pobrania
- 1534
- Wydruki
- 27
- Wyświetlenia
- 4295
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
HG gundam base. I use these for my kits because its cheaper and less noticeable than the one's you can buy. I made the top 3mm pin slightly drafted. If you need a tighter fit or it to go in further use your nippers and clip a tiny bit off the top.
I have added a version 2 where you can instead cut a bit of runner and stick it down the hole on the top. this lets you get a better and stronger peg to the kit. The hole is meant for a 3mm runner snip.
V3 lets you print in parts resulting in a much cleaner and stronger print. there is a hole for the peg. the peg file needs to be cut in half post print. use either half. i merged to pegs for better print quality and reliability.
Category: Model Robots