Yubikey Sliding Protective Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your Yubikey slide in and out just like a sliding thumbdrive. Also comes with a hole for your keyring.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Make your Yubikey slide in and out just like a sliding thumbdrive. Also comes with a hole for your keyring.
This model was designed using Autodesk Fusion360. The file is included for easy modifications.
Print Settings
Rafts: No
Supports: No
Resolution: 0.15mm
Filament: Das Filament PETG
Notes
Print the body in standing orientation with the USB slot facing the printbed.
The plug has to be printed with the flat side facing the bed.
Estimated print times: Body (35 min), Plug (10 min)
Post-Printing
Step 1
Take your Yubikey and slide it into the body so that the USB plug comes out of the smaller opening.
Step 2
Then push the plug into the large opening to prevent your Yubi from falling out. It is designed to be a very tight fit (0.1mm tolerance), so it is easier to insert if you push the whole thing against the table.
Now you can attach it to your keyring.
Category: Computer