Ender 5 Max tool head cover with integrated V8 air jets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cover is designed to work with my hotend cage for DXC ectruder and K2plus hot end
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 358
- Wydruki
- 5
- Wyświetlenia
- 1037
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Standard Digital File License
This front cover is designed to work with my cage for the DXC exdruder on the Ender-5max printer, but it will work with the stock cage. Look for Cage STL on my profile. Use:
"E5M tool cover V8 jets print project.3mf" for print settings.
Make sure your filament settings are perfectly calibrated. This is a difficult part to print!
After upgrading my Ender 5 Max to a DXC direct drive and a full K2+ hotend, the printer hasn’t had a single failure. I’ve run over 40 kg of filament through it, including multiple prints exceeding 40 hours, without issues.
This setup has been completely reliable—no clogs, no extrusion problems, no heat creep. Running the full K2+ hotend instead of mixing parts made a big difference in consistency, especially on long prints.
At this point, it’s been more stable than the stock configuration ever was.