1 / 3
In sink sponge caddy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A circular sponge caddy that sticks inside the sink with suction cups
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I showed my wife a novelty Scrubdaddy holder (you know the one) and asked if she wanted me to print one. She said she would prefer one that goes in the sink, instead of on the edge. I wouldn't find one so I made one.
You can probably print it without supports if your overhangs and bridges are dialed in, mine are not, so I used auto generated tree supports.
Printed in ASA to withstand hot water (and hopefully the dishwasher) at a .16 layer height.
Bought the suction cups off Amazon https://www.amazon.ca/dp/B075CFHRFT