1 / 5
MIL Connector System Size C 4 Contacts Keying N (D38999 C-4) — zdjęcie 1
1 / 5

MIL Connector System Size C 4 Contacts Keying N (D38999 C-4)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A MIL-DTL-38999 connector system that can be 3D printed. Uses Molex 1560 and 1561 contacts.

Ocena
0 / 5
Polubienia
4
Pobrania
21
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These models are an additive manufactured print-in-place MIL spec-ish electrical connector system. These connectors consist of four components divided into two groups: 

  1. Shells, wall mount receptacle and straight plug (in this model)

  2. Inserts, pin and socket inserts for Molex 1561 and 1560 contacts (in this model)

The shells make up the mechanical connection component of this connector system. They polarize the connection and make the connector system scoop proof.

There are nine sizes available numbered from A to J in increasing size order. Each shell is, furthermore, available in six keying options from A to E and N for normal. Only receptacles and plugs of equivalent size and keying option can be mated. 

The inserts are the adapter between the shells and the Molex 1561 and 1560 contacts. They localize the contacts and determine the number of contacts in the connector system. 

There are multiple inserts available for every shell size (at least 2 for every shell). They are sized from 9 to 25 in steps of 2. The size corresponds to the military codes A to J. Another part in the insert code hints on the number of contacts available. All inserts of a given shell size fit in any receptacle and plug regardless of their keying. Only connector systems with equivalent insert arrangement can be electrically mated. 

This model includes files for 

  • Shell size: C

  • Keying option: N

  • Insert: 13-4 (4 Contacts)

Print the models as shown in the pictures for best results. You may have to remove some stringing after the print. Furthermore, a simplified assembly instruction for the inserts is included in the pictures. 

To design your own inserts, you can find a drawing of the connectors dimensions in the mated state below. With your own inserts you can adapt the connector system to any contact you desire. 

Check out this project on github:

https://github.com/LMerbecks/D38999-3MF#

Tagi