1 / 7
Kakapo Earring Charm — Chubby NZ Parrot Pendant — zdjęcie 1
1 / 7

Kakapo Earring Charm — Chubby NZ Parrot Pendant

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Chubby kakapo (ground parrot from NZ) charm with hanging loop — earring, necklace, or keychain-mini.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A chubby kakapo — the flightless ground parrot of New Zealand — shrunk down into an earring-sized charm with a built-in hanging loop for jump rings, ear wires, or keychain split rings.

  • ~30 mm tall body, integral loop at the top

  • Prints standing upright; no supports needed for the body

  • Pairs of two make cute earrings; one on a chain makes a pendant

⚠ Heads-up on the loop The built-in hanging loop is fairly thin — looks fine printed but it can snap if you yank on it or drop the piece on a hard floor. Print with at least 3 walls and PLA+/PETG for a bit more toughness, and consider threading a real metal jump ring through the loop rather than hanging the charm directly off an ear wire. If you have a strong preference for a chunkier loop, scale the whole model up ~10 % before slicing — the loop thickens with it.

Photos: printed in cyan PLA, 0.2 mm layer height. Some stringing on the loops in the photos — a quick toothbrush or lighter-flash cleans it up.

Tagi