Enclosure for K9-ETH Crypto Mining PC Motherboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A high-airflow case for the K9-ETH SBC motherboard
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 858
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you are thinking of getting this printed in PCBWay's UTR-8100 or resin, you will have to redesign the mounts and lid parts that use brass inserts. Brass inserts will crack a resin print! The print in my video cracked because I'm dumb and used them anyway!
This is a high-airflow case for the K9-ETH SBC motherboard as seen in my video here https://youtu.be/vd974-yLO6E
It uses this button for a power button, you'll have to wire it to a couple female dupont connectors and plug it into the power switch header on the motherboard https://amzn.to/4sPqapz (affiliate link)
I HIGHLY recommend printing in a brass heat insert friendly material like PLA. I had mine made in resin, and the inserts basically did not work at all and actually cracked the material around where I tried to insert them. Here are the inserts I used https://cnckitchenus.store/?ngr-redirected=1