1 / 2
Sienci Autozero Touch Plate Holder - rail mount — zdjęcie 1
1 / 2

Sienci Autozero Touch Plate Holder - rail mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for the Sienci AutoZero Touch Plate that mounts on the front rail

Ocena
0 / 5
Polubienia
1
Pobrania
36
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Holder for the Sienci AutoZero Touch Plate that mounts on the front rail with 2 M6 x 14 button head bolt and M6 twist nuts that were leftover from the Altmill build. The magnet holder is for an M5 Cap Head bolt and nut. Or you could probably thread an M6 in there too.

I printed from the bottom up, .25 layers, 15% infill, PETG