slightly overengineered filament y splitter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Y-Splitter for Filament input. In order to connect an mmu (multi material unit) but also allow an manual input.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Print Settings
Material: PLA | PETG
Layer Height: 1.24
Walls: 3
Top- Base Layers: 3
Infill: 15% Gyroid
Dependencies
The splitter is made for PTFE Tubes with 4mm outer diameter and 3mm inner diameter.
No other Hardware required. Version with PC4 Connectors planned but not implemented yet.
Description
Most y-splitters are designed to be printed upright standing. This one is designed to be printed laying flat on the printbed. To avoid sagging ceiling layers the path is designed as teardrop profile. The angle of the teardrop is dependant on layer height. Smaller layer heights allows shallower overhang angles. The scad is parametrizable.
All transitions between Materials are made to first widen and afterwards reduce the diameter again.
Version History
20260426 - Initial Version. Only screw on caps for use without additional Hardware.