Toyota 4Runner 5th Gen - 3.5" Dash Speaker Mounts - Adapted for JBL GX328
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toyota 4Runner 5th-gen dash speaker mounts for 3.5" JBL GX328 speakers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I decided to install JBL GX328 speakers instead of the Infinity speakers. I chose these speakers for their lower impedance, which more closely matches the stock speakers' 2-ohm impedance in my JBL system. I found out that they will not fit in the mounts without increasing the opening diameter (increased to 78.5mm over 76.5mm). I reused the black T20 screws from the OEM speakers to secure them to the mounts instead of #8 machine screws. They seemed to work better in my opinion, and I prefer Torx over Phillips. I used a #10x1" sheet metal screw for the passenger side, as the original model description said. I'm very happy with the improved sound over my blown OEM speakers and glad I found these mounts to print instead of having to modify the OEM mount or buy one.
I used this wiring harness that works with the JBL system in my 2013 4Runner Limited: https://www.amazon.com/dp/B07VPFWLPK?ref=ppx_yo2ov_dt_b_fed_asin_title.