Modular Headphone Headband
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The goal here is to have a modifiable headband that I can continue to add more yokes to to fit a variety of headphones.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 35
- Wydruki
- 3
- Wyświetlenia
- 502
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Default Printing Settings:
0.2mm Layer Height or 0.16mm Preferably for higher details.
4 Walls - 5 Top Layers - 5 Bottom Layers - 40% Gyroid Infill.
Strap Specific Printing Instructions:
1) Make sure all parts use the same filament type. (TPU 95A)
2) Make sure you select the body part that's highlighted and renamed with printing parameters.
3) Make sure you select 27% Infill with 0 Top and 0 Bottom Layers. Infill pattern is up to you, I strongly recommend Honey Comb.
If done correctly it would look like this when sliced.
BOM:
Beyerdynamic Metal Head Bow (non-pro version). https://north-america.beyerdynamic.com/p/metal-head-bow
F3-8M Thrust Bearings. (x4) https://www.amazon.com/dp/B082PSL3SG
4x8x2mm Silicone O-Rings. https://www.amazon.com/dp/B07M5WL55G
M2x12 Socket Head. (x4)
M3x60 Standoffs. (x2) A little shorter is fine too for smaller heads. 5mm Outer Diameter.
M3x18 Countersunk (x2) A little longer is fine too.
M3x14 Countersunk (x4) A little shorter is fine too.
M3x6 Thumbscrews. (x2) A little shorter/longer is fine too. You could also use a 3D Printed M3 Thumbscrew. e.g.
You will need (x4) of these for the Omega Yokes. Pack should come with 20 of them.
