1 / 5
Mini replica (only 1m) of Claymore sword made of 25mm and 28mm tubes — zdjęcie 1
1 / 5

Mini replica (only 1m) of Claymore sword made of 25mm and 28mm tubes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple miniature replica (total length of only 1m) of a Claymore sword made from a tube with an outer diameter of 25mm

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
50
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Public Domain

the main feature of the design: you don't need to print the entire blade, you only need to print the sword's guard. (you can also print the back part to adjust the balance)

What you need to assemble the sword:

a tube with a diameter of 25mm or 28mm (if you want, you can modify the .step or .sldprt file using CAD to use a tube with a different diameter)

and you need to print the sword's guard. (it's about 40g of plastic)

optionally, you can print a rear tip to even out the balance.

ATTENTION!!! NEVER PRINT OR MAKE A TIP FOR THE FRONT END OF THE SWORD!!! IT MAY FALL OFF WHEN SWINGING THE SWORD!!! (I didn't add it to the model for this reason.)

To ensure that the guard does not change its position, there are 3 holes for M3 installation screws of any length.

The reference photos were taken from Wikipedia: https://ru.wikipedia.org/wiki/%D0%9A%D0%BB%D0%B5%D0%B9%D0%BC%D0%BE%D1%80#/media/%D0%A4%D0%B0%D0%B9%D0%BB:Scottish_claymore_replica_(Albion_Chieftain)2.jpg

Tagi