Adjustable Airsoft Iron Sights V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adjustments, proper co-witness height.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Iron sights with simple set and forget adjustments. Basic elevation and windage using set screws. Height allows for co-witness or lower 1/3 co-witness on optics. The base is slim and takes up around one slot and one flat.
Material - PLA+ is recommended for strength, though a material with higher heat deflection may be more suitable depending on where you use your replica. Outdoor fields can get pretty toasty.
Printing - set enough perimeters based on your nozzle that the base and clamps are solid material. Small supports are required for the bolt channel and the aperture pocket. Rear aperture does not require supports.
Hardware: the sights are clamped to the rail using an M4x25 socket head bolt and nut.
The front sight post is an M3x14 set screw. The post hole is generous and has no threads. You'll cut the threads as you insert, making for the tightest fitment.
The rear sight uses an M3x20 button head bolt and nut to secure the rear aperture to the sight body. The aperture will just be able to slide or be gently manipulated left to right while you adjust windage. On the front of the aperture, you'll insert a small M3x3 set screw that impedes the cross bolt, locking it into place once you are happy with the adjustment.
This kit from Amazon has plenty of set screws to make several sets - https://a.co/d/0eVe86I1