VEVOR 10L1201B Watch Winder LED Difuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple LED light difuser for VEVOR 10L1201B watch winder.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So, VEVOR is making a pretty nice, affordable, and quiet watch winders, right? Well, somewhere they have to save some money. For the watch winder lighting, they are using a simple short piece of LED strip, which is not diffused in any way. The LED strip itself is pretty strong, so at night the undiffused light is pretty sharp, and also I hated how every single LED chip is mirroring in the cromed parts of the watch winder.
I know, the flat diffuser would be better, but we are playing with the cards that we have. I found the short piece of diffuser for the R5 profile at home, so I've used it for this purpose. The only thing remaining was to design a profile for it. So I've modeled a simple frame to snap a diffuser in, with the hole at the base with the same dimensions as the used LED strip.
All you have to do is cut a 14cm long piece of the diffuser, gently squeeze, and snap it into the frame. I recommend sticking the frame to the watch winder first, for proper positioning. Then, you can snap the diffuser in. Keep the frame light, so 10% of infill is enough. Stick it to the watch winder with a few pieces of thin double-sided tape