1 / 2
CRX Del Sol Shift Boot / Gaiter Retainer (Anti-Sag Fix) — zdjęcie 1
1 / 2

CRX Del Sol Shift Boot / Gaiter Retainer (Anti-Sag Fix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shift boot retainer for Del Sols. Restores clean fitment using M4 inserts and bolts. OEM and aftermarket boot compatible

Ocena
5 / 5
Polubienia
7
Pobrania
42
Wydruki
0
Wyświetlenia
233
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Honda Del Sol / CRX Del Sol Shift Boot Retainer (Anti-Sag Fix)

Tired of your shift boot sagging from a collapsing oem bracket that refuses to hold shape? This replacement retainer clamps your OEM or aftermarket boot securely between two printed pieces, restoring a clean factory-style appearance and keeping the boot standing properly.

Designed for the Honda Del Sol with fitment confirmed.

Features✨

  • Fixes sagging / collapsed shift boot retainer

  • Clean OEM-inspired install

  • Two-piece clamp design for secure hold

  • Reuses your existing boot material

  • Easy install with common hardware

  • Perfect for restoration or upgraded interiors

Hardware Required🔩

  • 4x M4 heat-set inserts (M4x8 recommended)

  • 4x M4 bolts (matching length for your inserts)

Installation🛠

  1. Remove center console trim and shift boot assembly.

  2. Install 4x M4x8 heat-set inserts into the main body.

  3. Position your shift boot material between the main frame and clamp ring.

  4. Align boot evenly so seams sit where desired.

  5. Tighten M4 bolts gradually in a cross pattern until snug.

  6. Reinstall completed assembly into the center console trim.

  7. Enjoy a firm, non-sagging shift boot again.

Print Recommendations🧪

  • Material: PETG, ASA, ABS recommended

  • PLA usable for mild climates / show cars

  • Layer Height: 0.20mm

  • 4+ walls recommended

  • 20-40% infill

  • Print flat as oriented

Notes📌

  • Works with OEM boot or custom replacement boots depending on material thickness.

  • Do not overtighten hardware. Snug is enough.

Why I Made This🤠

This part was being unnecessarily held behind closed doors by someone who chose to sell access instead of share a simple solution. Meanwhile, owners were stuck dealing with sagging boots, broken retainers, or making their own fixes.

So I modeled my own version and released it.

Some parts deserve to be premium products. A basic fix for a common problem shouldn’t be one of them.

Print it, use it, improve it, keep the platform alive.

If You Like It🤝

Check out my other Del Sol and 90s Honda focused parts.

Tagi