1 / 5
Cut-off Wheel and Sanding Band made with Prusament UltraGlow PETG — zdjęcie 1
1 / 5

Cut-off Wheel and Sanding Band made with Prusament UltraGlow PETG

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dangerous! Safety has not been confirmed! So just look at it.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
238
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Open Community License v1

This does not guarantee safety at all. It is dangerous! so please do not try it.

Prusament Ultraglow PETG is extremely hard and requires a curing nozzle. The filament surface is very rough, posing a risk of injury.

I made a cutting wheel and a sanding belt to try it out. I used the Dremel 407 Sanding Band.

Remove the file from the Dremel Sandingband, attach the printed image, and secure it firmly.

In my testing, it wore out quickly, but I was able to cut through brass pipe.

The video is on my Twitter(@mataro37).