38mm Pole Mount For Reolink TrackMix PoE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic pole mount to go on an unused satellite dish bracket.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a mount for the Reolink TrackMix PoE for a 38mm pole, which is how I have mounted it to an old satellite dish mount on the side of my house.
I have used "TPU for AMS" for this as it is stiff enough to sit flush with the camera mount and hold the inserts effectively, but also flex slightly to help fit/grip the pole better than it might otherwise. It is segmented so you can also print the parts in PETG with a TPU liner.
You need the following hardware to complete the build:
8x M4 inserts, Ruthex or CNC kitchen are the right size
4x M4x8 screws, for attaching the camera plate to the mount
4x M4 screws between 14-18mm long and washers for clamping the mount together
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨