Fnirsi SWM-20 Storage Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a simple case for my SWM-20. So I remixed the excellent Rugged Box with a custom insert to hold it.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 64
- Wydruki
- 2
- Wyświetlenia
- 452
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple case for the Fnirsi SWM-20 Battery Spot Welder. I used the excellent parametric Rugged Box by Whity and adjusted the measurements in Fusion. Then I created an insert to hold the tool and accessories. The Leads and extra tips fit under the tool. I made the lid taller than I needed in anticipation of adding some additional storage at a later date. For now I glued a piece of foam to keep the tool from bouncing around. I added the logo and text in Prusa Slicer so they are not in the Fusion file. I also added the logo so you can print it and glue it onto the lid if you want. M3x30 screws were used for the hinges and latches. Enjoy.