150mm IBC sieve filter with pipe access for IBC with 160mm Top Hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Resized using another model and added the pipe access hole - 150mm model to fit 160mm size hole on IBC Tank
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sieve or screening filter for the top of an IBC container with access hole for submersible pump pipe and cable - I am using Bosch Battery Powered water butt pump which fits into the top of the IBC perfectly.
This is for tanks with 160mm top hole - unit is 150mm so will have some wiggle room - hole should fit most garden hose sizes along with a small cable if needed.
Printed WITH supports 50% infill (not much to infill only around the pipe hole so could even do 100% if you wanted extra strength. I printed mine in PETG but if you have it ASA might be better solution if you are in a harsh climate - do not recommend PLA due to moisture and UV exposure (it will not last the test of time)
All attributes and kudos for this model go to other designers I just could not find one with the pipe hole access that fitted the 160mm top hole of my IBCs (these are standard and the other kind believe they are 220mm are classed as "wide mouth" IBC tanks) so I took the ideas and models and redesigned them in Tinkercad and said I would share for others in the same situation as me!
Happy printing!