Half Pint Wide Mouth Jar Beer Crate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crate for stackable storage of half-pint wide-mouth jars from Ball and Kerr, and any similar sized jars.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Crate for stackable storage of half-pint wide-mouth jars from Ball and Kerr, and any similar sized jars.
I took the source model and imported it into Blender, resized (some scaling, some selective stretching) for these jars, decreased the thickness of the walls, reduced overhangs by angling them to be self-supporting, reduced the hard corners that tend to gather dust and become hard to clean, and I made other general tweaks to reduce material use and smooth out some of the quirks that came from the resize and thickness modifications. I also removed some of the long horizontal ribbing to use less material and less overhangs, since I've had issues with some milk crates with long horizontal overhangs.
This stacks perfectly with https://www.printables.com/model/1787607-pint-wide-mouth-jar-beer-crate and has the same X and Y dimensions, which can accept one wide-mouth pint or two wife-mouth half-pint jars.
This is also similar to but distinct from https://www.printables.com/model/1742601-half-pint-regular-mouth-jelly-jar-beer-crate-2x3 in that it's designed for a completely different jar. This one holds four jars (2x2 arrangement) and the other holds six (2x3 arrangement) and the jars are not the same diameter or height. Both are derived from the same source model.
If you like this or prefer another size, check the below for a different form factors: