Plant hanger for thick shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a no screw way to securely hang potted plants from thick shelves.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
I have thick 1.25" shelves around a large south facing window that i wanted to hang plants from without putting holes in the shelves. I printed this to mount on the shelf allowing for 2 hanging position based on the size of the basket.
There's small pegs included with this model that have a recessed magnet in them, they sit on top of M3 screws that act as height adjusters to accommodate a range of shelf heights. The magnets are encapsulated so they must be placed in the prints at a layer pause. (no glue needed and makes them more pet and child friendly)
for heavy planters, use the hole closest to the edge of the shelf, for lighter hangers use the hole closest to the window. The pots hanging from the window side hole shown above are about 10" in diameter and 7" deep. the mounts have no problem with this load.
printed in PETG with 15% gyroid infill and 6 walls. For a stiffer part you may want to try PLA, it just doesn't print well for me.