1 / 8
Chinese PDTO Chainsaw Choke Lever - Fringe Case # 869d — zdjęcie 1
1 / 8

Chinese PDTO Chainsaw Choke Lever - Fringe Case # 869d

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A customer brought in a Chinese chainsaw that he'd bought online. The choke level had broken and he didn't have any of…

Ocena
0 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
365
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A customer brought in a Chinese chainsaw that he'd bought online. The choke level had broken and he didn't have any of the pieces. I've never heard of a PDTO, so I have no idea where to get replacement parts for this or if you even can. Fire up FreeCAD and a few iterations later, we're up by another happy customer.

I printed this in PETG to hopefully withstand the temperatures within a chainsaw at a layer height of 0.2mm and 40% triangular infill. You will need supports enabled and I raised it above the bed by 10mm so that the knob was better supported. The original lever more than likely had a plastic pin that hooked into the choke lever, but I knew that 3d printed plastic at that diameter would never hold up. Instead, I cut a small piece of heavy-duty wire I had laying around (maybe a coat hanger?) and bent it into a small 'L' shape. I heated up the longer end with a torch lighter and then pressed it into the hole, with the 'L' pointing towards the knob. Hook that into the choke lever and you're good to goat.


Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

40%

Filament: NovaMaker PETG red (black would have been better)

Category: Replacement Parts

Tagi