1 / 29
Sega ST-V Sound Board Mount for Lions3 Acrylic Case — zdjęcie 1
1 / 29

Sega ST-V Sound Board Mount for Lions3 Acrylic Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a mounting solution for the Sega ST-V Sound Board in a Lions3 acrylic case with the Darksoft Dark Knight Multi

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

Sega ST-V Sound Board Mount for Lions3 Acrylic Case (by Clint Kolodziej)

This is a mounting solution for the Sega ST-V Sound Board, designed to fit in the Lions3 acrylic case with the Darksoft Dark Knight Multi (as it will obstruct the cartridge slot).

Additional Notes:

- The Lions3 case I designed for didn't have the cutout for the LCD selector that was offered in later revisions. Adjustments can be made to increase the standoff heights to account for the extra space needed for that selector, such as replace 70mm and 20mm standoffs used on the left and right sides of the case with 90mm and 40mm standoffs.

- Due to the added height of the case, and the value of all included parts I switched from using 3d printed standoffs to aluminum standoffs to ensure there are no accidental breaks on a 3d printed part that could cause catastrophic failure of the case. Go ahead and make some 3d printed standoffs if you are comfortable doing so and can print with more structurally sound materials, this guide should get you most of the way there.

- If you need a case/mount for the OLED selector that came with the multi, please consider using the case I designed that fits into the unused cartridge slot of the Lions3 plexi: https://www.printables.com/model/1661077-darksoft-sega-st-v-dark-knight-multi-oled-selector

When printing this I used PLA+ with the following overrides to the defaults in Cura:

  • - Top Layers: 5

  • - Bottom Layers: 5

  • - Wall Line Count: 6

  • - Infill Density: 60

  • - Supports: Tree (Touching Build Plate), only needed on Fan mount

Depending on your material the above may or may not be needed, I found default settings with PLA+ didn't provide the rigidity that I required.

Hardware needed to build the case:

Part Totals (Overall):

  • 6mm screw: 1

  • 8mm screw: 5

  • 12mm screw: 18

  • 16mm screw: 2

  • 35mm screw: 6

  • 30mm screw: 2

  • 45mm screw: 3

  • 50mm screw: 2

  • Fan screw: 4 or 8

  • 12mm standoff: 9

  • 15mm standoff: 9

  • 20mm standoff: 3

  • 25mm standoff: 4

  • 40mm standoff: 7

  • 70mm standoff: 2

  • Foot:  4

  • Spacer:  46

  • Washer:  30

  • Simple Washer: 4

  • Nut:  1

How to assemble the standoffs/supports (see photos for examples):

Left Side:

Left front:

35mm screw > Foot > Base > Spacer > 12mm standoff > Spacer > PCB > Spacer > 70mm standoff > Spacer > Top > Washer > 16mm screw

Left near back:

12mm screw > Washer > Base > Spacer > 12mm standoff > Spacer > PCB > Washer > 12mm screw

Left back:

35mm screw > Foot > Base > Spacer > 12mm standoff > Spacer > PCB > Spacer > 70mm standoff > Spacer > Top > Washer > 16mm screw

Part Totals:

  • 35mm screw: 2

  • 16mm screw: 2

  • 12mm screw: 2

  • Foot:  2

  • Spacer:  10

  • Washer:  4

  • 12mm standoff: 3

  • 70mm standoff: 2

Right Side:

Right front:

35mm screw > Foot > Base > Spacer > 12mm standoff > Spacer > PCB > Spacer > 40mm standoff > Spacer > Front SB Mount > Spacer > 20mm standoff > Spacer > Top > Washer > 45mm screw

Right second front:

35mm screw > Washer > Base > Spacer > 12mm standoff > Spacer > PCB > Spacer > 40mm standoff > Spacer > Front SB Mount > Spacer > 20mm standoff > Spacer > Top > Washer > 45mm screw

Right third front:

12mm screw > Washer > PCB > Spacer > 40mm standoff > Spacer > Main SB Mount > Washer > 12mm screw

Right near back:

35mm screw > Washer > Base > Spacer > 12mm standoff > Spacer > PCB > Spacer > 40mm standoff > Spacer > Main SB Mount > Washer > 12mm screw

Right back:

35mm screw > Foot > Base > Spacer > 12mm standoff > Spacer > PCB > Spacer > 40mm standoff > Spacer > Main SB Mount > Spacer > 20mm standoff > Spacer > Top > Washer > 45mm screw

Second-right front:

12mm screw > Washer > PCB > Spacer > 40mm standoff > Spacer > Front SB Mount > Washer > 12mm screw

Second-right back:

12mm screw > Washer > PCB > Spacer > 40mm standoff > Spacer > Main SB Mount > Washer > 12mm screw

Part Totals:

  • 45mm screw: 3

  • 35mm screw: 4

  • 12mm screw: 7

  • Foot:  2

  • Spacer:  28

  • Washer:  12

  • 12mm standoff: 4

  • 20mm standoff: 3

  • 40mm standoff: 7

Multi (Center):

Multi left-front:

30mm screw > Washer > PCB > Spacer > 15mm standoff > Multi PCB > Simple Washer > 25mm standoff > Main SB Mount > Washer > 12mm screw

Multi left-back:

50mm screw > Washer > Base > Spacer > 12mm standoff > Spacer > PCB > Spacer > 15mm standoff > Multi PCB > Simple Washer > 25mm standoff > Main SB Mount > Washer > 12mm screw

Multi right-front:

30mm screw > Washer > PCB > Spacer > 15mm standoff > Multi PCB > Simple Washer > 25mm standoff > Main SB Mount > Washer > 12mm screw

Multi right-back:

50mm screw > Washer > Base > Spacer > 12mm standoff > Spacer > PCB > Spacer > 15mm standoff > Multi PCB > Simple Washer > 25mm standoff > Main SB Mount > Washer > 12mm screw

Note: immediately on top of the Multi PCB we use "simple" washers just for the extra 1mm of thickness to make everything align correctly

Part Totals:

  • 50mm screw: 2

  • 30mm screw: 2

  • 12mm screw: 4

  • Spacer:  8

  • Washer:  8

  • Simple Washer: 4

  • 12mm standoff: 2

  • 15mm standoff: 4

  • 25mm standoff: 4

Sound Board (on top of printed mounts):

4x Soundboard mounting screws:

12mm screw > SB Mount > 15mm standoff > SB PCB > Washer > 8mm screw

1x Soundboard mounting screws (front right):

12mm screw > SB Mount > 15mm standoff > SB PCB > Fan Mount > Washer > 8mm screw

1x Soundboard mounting screws (front left):

Nut > SB PCB > Fan Mount > Washer > 6mm screw

Part Totals:

  • 12mm screw: 5

  • 8mm screw: 5

  • 6mm screw: 1

  • Washer:  6

  • 15mm standoff: 5

  • nut:  1

Cooling Fans (front of):

Fan Mount:

Screw included with Noctua fan > Side fan mount of case > Noctua fan

Part Totals:

  • Fan Screws: 4 or 8

Tagi