1 / 2
Plague Plaque - a COVID-19 Quarantine Sign — zdjęcie 1
1 / 2

Plague Plaque - a COVID-19 Quarantine Sign

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When we learned that we were living in Stephen King's "the Stand," I draped a chain across the doors of my shop and…

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
241
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

When we learned that we were living in Stephen King's"the Stand," I draped a chain across the doors of my shop and placed a cardboard sign on it telling people to stay behind the chain. You know, back when we were all told that lockdowns, mask orders and so-called social distancing would only last a few weeks? Well, here we are months later and we're still being lied to, I mean informed by politicians that giving up our freedoms in the name of perceived securities is "the right thing to do" - nevermind what Benjamin Franklin had to say on that subject. But anyway... I digress. Since this crap has gone on longer than imagined, my little cardboard sign ain't doing so well. I think it may have COVID. So I am putting it out to pasture and replacing it with this shiny new, four-color 3d printed plaque. A plague plaque, if you will. lol...

The letters are designed to have a highlight (yellow if you follow my recommendations) and a shadow (black as per my colors choices). These are subtle, but they are there. My yellow may have been a bit too bright. A slightly darker yellow will stand out more against the pure white background and be a tad more obvious.

This is being presented in two versions - one with holes for hanging with hooks and one without holes for hanging with double-sided tape. Either way, for best results, I recommend the following print settings and layer changes:

Using a 0.4mm nozzle printing at a 0.2mm layer height, pause and change colors at these layers (assuming your slicer starts counting layers at 0):

  • layer 00 - white
  • layer 10 - yellow
  • layer 14 - black
  • layer 16 - green

Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

40%

Notes:

The letters are designed to have a highlight (yellow if you follow my recommendations) and a shadow (black as per my colors choices). These are subtle, but they are there. My yellow may have been a bit too bright. A slightly darker yellow will stand out more against the pure white background and be a tad more obvious.

This is being presented in two versions - one with holes for hanging with hooks and one without holes for hanging with double-sided tape. Either way, for best results, I recommend the following print settings and layer changes:

Using a 0.4mm nozzle printing at a 0.2mm layer height, pause and change colors at these layers (assuming your slicer starts counting layers at 0):

  • layer 00 - white
  • layer 10 - yellow
  • layer 14 - black
  • layer 16 - green

Category: Signs & Logos

Tagi