Sony Walkman WM-23 Battery Door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This should fit others such as the WM-11, WM-24, and WM-25
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a battery door for a WM-23 I was repairing. There are some other battery doors out there, but for whatever reason, I couldn't get them to fit for me. I created my own parametric model. The link is available below in case you need to tweak the dimensions.
I tried to keep 3D printing tolerances in mind, so hopefully it prints well for others. I did some light sanding with 500 grit sandpaper, but it was only to smooth the surface.
It's a quick, easy, low-risk print. I used these print settings:
1. 0.4mm nozzle
2. Initial layer: 0.2mm
3. Layer height: 0.16mm
4. Tree supports
5. Brim
6. 0.2mm brim distance
7. Initial layer horizontal expansion (elephant's foot compensation): 0mm or disabled.
8. Make sure your extrusion rate, flow, and initial layer flow are accurate
Created in Onshape:
https://cad.onshape.com/documents/5631af36e427368845202625/w/e301fe85cd295809a6379d95/e/608ff90634c29cf5f64680a2?renderMode=0&uiState=69ed3486d87e5caafe5b8e81