Modified Mold for EggBot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have been using the silicone molds for Egg Painter Mini posted by @ANicolai but I noticed that the marker hits the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have been using the silicone molds for Egg Painter Mini posted by @ANicolai but I noticed that the marker hits the edge of the larger pad when it gets close to that end. To solve that problem, I trimmed the edge of the pad down at an angle with an X-acto knife and it worked much better. So... to that end, I have recreated mold_a with a built in bevel. While I was at it, I added a curve to the indention to help grip the egg better than the flat did.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
No
Resolution:
0.2mm
Infill:
20%
Category: 3D Printer Parts