1 / 4
Powerful Rubber Band Gun - 1 Hour Print– 7‑Shot Easy‑Aim Blaster (No Hardware) — zdjęcie 1
1 / 4

Powerful Rubber Band Gun - 1 Hour Print– 7‑Shot Easy‑Aim Blaster (No Hardware)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Powerful rubber band launcher holds 7 bands, shoot one at a time or use rapid fire!

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

  This model is straightforward but offers a lot of enjoyment. While it may not be the most aesthetically pleasing, its performance is impressive. You can easily load 6-7 rubber bands, as shown in the demo video. To operate it, aim at the top of the launcher and fire by pushing one or more rubber bands off the curve, allowing them to soar through the air.

  Loading the launcher is quite simple. Refer to the demo video for guidance: slide the rubber bands into the slit, pull back, and start from the bottom of the rubber band holster clip.

To assemble the parts, use glue and adjust the handle as needed!

  For optimal print settings, aim for an infill of 15-20%. Supports are not necessary, and you won’t need a brim, skirt, or ironing. Suitable filaments include PLA, PETG, and others. Enjoy your printing experie

If you like this model, consider giving a tip to support Fonn Prints and help us with future models and more! 

Tagi