Yet another retainer shelf clip for 5/8" thick shelf with 1/4" peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another retainer shelf clip for a 5/8" thick shelf with 1/4" peg.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is yet another retainer shelf clip for a 5/8" thick shelf with 1/4" peg. My cabinets were missing a few of these, so I used a micrometer to measure the original clip and produce a new one with some modifications. @Wyldesyde007 produced a similar clip that fits the same sizing. Check it out and decide which works best for you.
I retained the peg ridges and added an additional 1mm depth.
I opted for a smooth clip front instead of retaining the trough.
The base is block shaped for additional support.
Overall this version of the clip ended fitting a bit more securely than the original. The original was secure enough, but tended to slip a little and had an awkward look to it if the shelf was not perfectly centered.
Images are shown with the original clip for comparison.