1 / 3
Airbrush Spray Booth Air Filter version 2 — zdjęcie 1
1 / 3

Airbrush Spray Booth Air Filter version 2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

So... Airbrush Spray Booth Air Filter was a bust. Neither fan, even when stacked together had enough power to pull air…

Ocena
0 / 5
Polubienia
24
Pobrania
138
Wydruki
0
Wyświetlenia
1179
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

So... Airbrush Spray Booth Air Filter was a bust. Neither fan, even when stacked together had enough power to pull air through either a coffee filter element or a small engine pre-filter, much less paint particles. So....

Enter Airbrush Spray Booth Air Filter version 2. This one utilizes an AC Infinity AXIAL 1238W, 120vAC, 120mm x 38mm Muffin Fan, model #HS1238A. For the filter, I used a carbon filter that I trimmed to fit the tray. Same basic design as the first version - fan mounts on the carrier; that bolts to the cardboard box (I think I'll mount it on the rear wall this time); the filter lays in the tray; the insert holds the filter in place; and the tray slides in to the carrier. I especially like the looks and feel of this one. With the size and shape, it's like pulling a negative plate out of a large format camera :) Anyway... this one does have enough power to do what it's supposed to do.

As usual, print in the orientation presented for best results.


Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Supports:

Yes

Resolution:

0.2mm - 0.3mm

Infill:

20%

Category: Art Tools

Tagi