Water Main Shutoff Tool - 1/2" Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found myself needing to do some work on my water line this week and just could not get a good angle on the main…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 2
- Wyświetlenia
- 255
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I found myself needing to do some work on my water line this week and just could not get a good angle on the main water shutoff valve with a pair of pliers. A little while in a CAD program and seven hours later, out pops this handy little tool. Yes...seven hours. I tend to over-engineer everything.
This was printed with 70% triangle infill, 2mm walls (5 walls with a 0.4mm nozzle) and 1mm top and bottom (5 layers at 0.2mm layer height). This may be overkill, but I like things to hold up. I used supports, but depending on your printer's bridging abilities, you may not need them.
The tool utilizes a 1/2" drive for use with a standard 1/2" ratchet or breaker bar.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
Yes
Resolution:
0.2mm
Infill:
70%
Filament:
Overture PLA
black
Notes:
This was printed with 70% triangle infill, 2mm walls (5 walls with a 0.4mm nozzle) and 1mm top and bottom (5 layers at 0.2mm layer height). This may be overkill, but I like things to hold up. I used supports, but depending on your printer's bridging abilities, you may not need them.
Category: Tools