Z-Offset Reminder Plaque
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OK... yes... I know that this is a stupid little thing, but it's no stupider than a lot of things I see on here.…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
OK... yes... I know that this is a stupid little thing, but it's no stupider than a lot of things I see on here. Besides... this actually serves a purpose. If you're anything like me and you have the memory of Dory and the attention span of a ... oh, look! Is that a squirrel? Wait... what was I saying? Oh yeah....
I have trouble remembering to subtract from the z-offset to drop the nozzle down and to add to raise the nozzle up. This little plaque is to help me remember. I had this written on an index card, but come on... what's a 3D printer for if not for making stupid things?
For best results, you can print this in three colors. Assuming 0.2mm layer heights:
- Layer 00 - red
- Layer 07 - black
- Layer 10 - white
I also recommend enabling [Draft Shield] and [Ironing] (both in Cura) for the best results.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
Assuming 0.2mm layer heights:
* Layer 00 - red * Layer 07 - black * Layer 10 - whiteI also recommend enabling [Draft Shield] and [Ironing] (both in Cura) for the best results.
Category: 3D Printer Accessories