AeroPress Goes Vertical
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist vertical storage for the AeroPress, with an Next125 kitchen wall hanger.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
About
Extend the simplicity of the AeroPress with a minimalist organizer to keep it out of the way, yet always ready to brew.
Our kitchen is by Next125, and has a handy aluminum slot for hanging things, which the "backbone" of this organizer slots into. However if you want to make a wall-mounted version, the three "rings" can easily be re-used for that as well. Note that the backbone needs to be ridged enough to not flex too much.
If your AeroPress didn't come with the funnel, it will still fit nicely into the ring. See the last picture for an example. My funnel and filter holder is from my original AeroPress which was retired some time ago. The pictures show the AeroPress Clear, made with Tritan plastic. I did not try the other models/colors, as I don't own one.
Flip the stir-rod holder so it's on the left or right, depending on your ambidexterity, or need for space.
BOM
3x M3 x 8mm countersunk screws amazon.de/-/en/dp/B0FM2GN35N
3x M3 heat-set inserts
Assembly
The three "rings" each have a M3 heat-set insert, and take a M3x8mm countersunk screw. You can use non-countersunk as well if you have them.
Print in PETG so it has some give, and is washable with hot water.
Made With
Designed in Berlin with OpenSCAD, Python, and Fusion 360.